Hardware Tools

Sort By:  
  • BUTTON EMERGENCY (SWI840)

     

    BUTTON EMERGENCY
     
    Description 
    Universal emergency / panic button. surface mounting. N.o. and N.C. contacts.
    Add to Cart
    $11.55
  • CAT5e STRANDED CABLE- 300 METRE EASY PULL ROLL (101.313)

     

    CAT5e STRANDED CABLE- 300 METRE EASY PULL ROLL
     
    Description 
    Great for M1 or other type of installations that needs Cat5e spec cable, but connecting into screwed type terminal blocks. 
     
    Supplied in an easy pull (roller) 305 metre box. Cat5e Stranded cable - Green
    Add to Cart
    $160.05
    $232.32
  • TERMINAL STRIP 12 WAY (BAS210)

     

    Terminal Strip 12 WAY
     
    Description
    • Easily Cut to Size
    • Captive screws
    Add to Cart
    $3.74
    $5.39
  • TACWISE STAPLE GUN CT45 (HAR100)

     

    TACWISE STAPLE GUN CT45
     
    Description 
    • Tacwise Z3-CT45 Cable Tacker
    • Ideal for the installation of low voltage (LV) alarm, IT, security, hi-fi and telephone cables up to 4.5mm in diameter
    • Lock-down handle
    • Staple/nail refill window
    • Bottom loading
    • Adjustable driving force/ pressure control
    • Fires 8mm - 10-mm cable tacker staples
     
    Add to Cart
    $179.04
    $272.80
  • TACWISE STAPLE GUN CT60 (HAR130)

     

    TACWISE STAPLE GUN CT60
     
    Description 
    Insulated staple gun ideal for CAT-5 and CAT-6 cable. (T30 equivalent)
    Staples to suit: HAR140 10mm Staples 5000 per box. HAR150 12mm Staples 5000 per box.
     
    Add to Cart
    $118.75
    $169.95
  • STAPLE GUN JY669 (HAR200)

     

    STAPLE GUN JY669
     
    Description 
    • Staple Gun JY669
    • Uses HAR210, HAR220, HAR230 and HAR240 staples
    • Ideal for electrical work as the staples are insulated and they do NOT crush cables
    • This means that you can actually use them with CAT5 cabling while following the CAT5 cabling guidelines and maintaining your network performance
    Add to Cart
    $59.62
    $87.89
  • BLT BATTERY LIFE TESTER 12 Volt (101.270)

     

    BLT BATTERY LIFE TESTER 12 Volt
     
    FEATURES:
    • Compact, Low cost, and easy to use.
    • Does not discharge or damage the battery.
    • Analyzes 12 Volt Rechargeable Batteries.
    • Warns if battery voltage is too low.
    • Replaceable test leads.
    • Includes Padded Carrying Case.
    • Includes Self-Adhesive Test Data Labels.
    • Lifetime Limited Warranty
    • Numeric LED display shows battery voltage, and Mhos reading.
     
    SPECIFICATIONS:
    • Operating Voltage: 10V - 14 Volts D.C. 1.1 Amps Max.
    • Current Draw: 0.0016Ah for full test
    • Battery Leads: ~12 Inches
    • Enclosure Size: 111.8mm x 76.3mm x 29.2mm w/o carrying case
     
    Add to Cart
    $205.28
    $315.59
  • MULTI-FUNCTION CABLE TESTER (104.012)

     

    MULTI-FUNCTION CABLE TESTER
     
    Description 
    Great Tool to check on cable connections, RJ-45 / RJ-11 / USB / BNC -- LED Indicators on PIN out's and much much more.
    Add to Cart
    $205.69
    $318.89
  • BNC CRIMPING TOOL (100.356)

     

    BNC CRIMPING TOOL
     
    Description 
    Solid Steel Crimper ideal for heavy duty work. Suits RG59 BNC push on connectors.
    Add to Cart
    $59.62
    $86.90
  • Creep-Zit™ PREMIUM ACCESSORY TIP KIT - THREADED CONNECTOR PREMIUM ACCESSORY TIP KIT (101.572)

     

    Creep-Zit™ PREMIUM ACCESSORY TIP KIT - THREADED CONNECTOR PREMIUM ACCESSORY TIP KIT
     
    Description 
    A Complete Tip Kit and Case for Your Creep-Zit System!  This kit contains a wide range of specialized threaded connector tips for your Creep-Zit™ system.
     
    The kit is intended to complement your Creep-Zit Pro 36 ft. Push/Pull Rod Kit (Model CZP36), the Creep-Zit 30ft. Rod Kit (Model CZ30 or CZ30L) or the Creep-Zit 24ft. Compact Rod Kit (Model CZ24) by adding multiple specialty tips to meet a wide range of installation challenges. The kit includes the following components: Creep-Zit Threaded Z-Tip (for secure wire retrieval) Creep-Zit Threaded J-Tip (for pushing or lay-up) Creep-Zit Threaded Ceramic Magnet Retrieval Tip Creep-Zit Threaded Magnetic Locating Tip and Compass Creep-Zit Threaded Ball Chain Tip Creep-Zit Threaded Flex Tip Creep-Zit Threaded Screw Tip Creep-Zit Male Bull Nose Tip Creep-Zit Female Bull Nose Tip “Piggy-Back” tip storage case
     
    Add to Cart
    $237.37
    $340.67
  • Fish Tailz™ - PULL SOCKS (1/2 Inch) (101.579)

     

    Fish Tailz™ - PULL SOCKS (1/2 Inch)
     
    Description 
    Pull Wire or Cable Quicker, Without Stripping and Taping The Fish Tailz™ Pull Sock Kit is an ultra convenient assortment of eight different expandable, flexible mesh pull socks for pulling bundled or non-bundled wire and cable up to 2" in diameter. Each mesh sock is made of our proprietary, flexible, expandable and contractible tight weave monofilament mesh. Similar to a “Chinese finger trap,” these socks easily slide onto cable bundles yet provide a super strong grip on the cable when pulled with tension.
     
    In each sock, the mesh is fused to an ultra strong bull nose at one end with a cross-hole to allow you to connect your mesh sock to a pull line without taping. All eight mesh socks are contained in a handy nylon organizer roll-up case that provides easy removal and identification of each sock and it’s diameter. Hook and loop fasteners keep your organizer case rolled-up and secure. Individual mesh socks are available separately.
     
    The eight Fish Tailz pull socks are each sized to accommodate the following diameters of non-connectored cable or bundles: 1/8" dia. (accommodates single RG6 or equivalent) /4" dia. (accommodates double RG6 coax or equivalent) 3/8" dia. (accommodates four RG6 coax or equivalent) 1/2" dia. (accommodates six RG6 coax or equivalent) 3/4" dia. (accommodates nine RG6 coax or equivalent) 1" dia. (accommodates 14 RG6 coax or equivalent) 1-1/4" dia. (accommodates 20 RG6 coax or equivalent) 1-1/2" dia. (accommodates 30 RG6 coax or equivalent) Pull your socks up and save time on any installation.
    Add to Cart
    $19.97
    $28.51
  • EXTENDABLE POCKET RETRIEVER (101.581)

     

    EXTENDABLE POCKET RETRIEVER
     
    Description 
    This mini-scoping retriever can save you enormous time trying to hunt for that wire inside the wall. The retriever is approximately 5" long collapsed and easily can fit inside your shirt pocket with its handy pocket clip. The retriever extends out to 18" and has a hook at the end that will fit through a 1/4" hole. For the Professional Installer this is one of those tools, "when you need it, you really need it!"
    Add to Cart
    $24.73
    $35.09
  • ReBore-Zit™ DRILL BITS (3/8in PILOT SIZE) (101.559)

     

    ReBore-Zit™ DRILL BITS (3/8in PILOT SIZE)
     
    Description 
    The ReBore-Zit drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole. The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft. Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire.
     
    Available in 3/8” and ,3/4” (final size of re-drilled hole) diameters. Each diameter has an associated pilot hole size. Use the appropriate ReBore-Zit bit to accommodate the pre-existing hole (pilot hole) and step-up in ReBore-Zit sizes until you obtain your desired final hole size.
    Add to Cart
    $215.92
    $309.19
  • STAPLES ARROW T18 3/8 10mm (HAR110)

     

    STAPLES ARROW T18 3/8 10mm
     
    Add to Cart
    $15.02
    $23.71
  • STAPLES ARROW T18 7/16 11mm (HAR125)

    STAPLES ARROW T18 7/16 11mm

    Add to Cart
    $9.02
    $13.64
  • ReBore-Zit™ DRILL BITS (1/4 Inch Pilot Size) (101.558)

     

    ReBore-Zit™ DRILL BITS (1/4 Inch Pilot Size)
     
    Description 
    The ReBore-Zit drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole. The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft. Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire.
     
    Available in 3/8” and ,3/4” (final size of re-drilled hole) diameters. Each diameter has an associated pilot hole size. Use the appropriate ReBore-Zit bit to accommodate the pre-existing hole (pilot hole) and step-up in ReBore-Zit sizes until you obtain your desired final hole size.
    Add to Cart
    $89.65
    $129.58
  • DIRECTIONAL TOOL - GUIDE FOR EXTENDED DRILL BITS (101.570)

     

    DIRECTIONAL TOOL - GUIDE FOR EXTENDED DRILL BITS
     
    Description 
    The Directional Tool permits you to hold, control and guide flexible shaft drill bits and extensions into wall cavities and other confined spaces. Place the tool over your flexible drill bit shaft and arc your bit into the proper angle of attack before drilling your hole. Made of hardened 1/4" steel and welded construction, our directional tool is finished with a durable and attractive powder coating for years of reliable, trouble free service.
     
    Product Hi-Lite This tool is recommended when using any of our flexible drill bit extensions.
    Add to Cart
    $38.45
    $54.89
  • EXT™ SERIES FLEXIBLE EXTENSIONS - FOR DRILL BITS (3/6 Inch Shank for 3/16 Inch 55 Inch long) (101.569)

     

    EXT™ SERIES FLEXIBLE EXTENSIONS - FOR DRILL BITS (3/6 Inch Shank for 3/16 Inch 55 Inch long)
     
    Description 
    Our EXT series of drill bit extensions are designed for a variety of unique drilling situations. They are designed to handle high torque loads, yet still allow needed flexibility for better control.
     
    These extensions are designed to handle the most common shank sizes of flexible drill bits used in wire installation: 3/16", 1/4" and 5/16". The EXT series enables the installer to drill through top and bottom plates and multiple fire blocks from the same entry point, making a two story #or beyond# retrofit installation quick and easy.
     
    Simply determine the length of extension needed for the operation, determine the shank size of the drill bit #the end that chucks into your drill#, tighten the set screws to secure the bit to the extension, and you’re ready to go. #Note: As with any long bit drilling situation, where the bit can be unwieldy, we also recommend our AT-7 drill bit directional tool for stability and control. Refer Ness Part No. 101-570#. Our EXT extension series comes in several lengths and configurations to customize your unique drilling situations. A hex wrench for the set screws is included. Features Include: Fits most standard shaft sizes. Great for multi-floor drilling. Most sizes are flexible.
    Add to Cart
    $68.19
    $96.14
  • Grabbit™ - FIBERGLASS TELESCOPING POLES (12 FOOT) (101.574)

     

    Grabbit™ - FIBERGLASS TELESCOPING POLES (12 FOOT)
     
    Description 
    If you can touch the wire with the pole, you can GRABBIT! The Grabbit series of telescoping poles are constructed of non-conductive, lightweight, shockproof, friction locking telescoping fiberglass. The tool is indispensable for running (pushing or pulling) wires or cables through limited access areas and false ceilings. The Grabbit is designed for both residential and commercial installations.
     
    The tool includes a patented Z-tip wire “grabber” tip. The inner V of the Z-Tip has a double knife edge designed to literally grab the wire insulation without cutting the actual metal wire, while the outer V (without knife edge) is designed to push a wire loop. Both the GR12 (Ness Part No. 101-574) and GR18 (Ness Part No. 101-575) now include a new handy snap-on light accessory included for seeing in dim lighting. Just snap on the LED light in dark applications, and snap it off when not in use. Replacement GRABBIT clip-on lights are available separately.
     
    Product Notes Lightweight construction make the Grabbit pole easier to use than other poles. Includes a clip-on LED tip light and new improved protective end-collars on each section. Product Hi-Lite Great for both commercial and residential attics and crawl spaces. The Grabbit it available in two lengths: The GR12 (Ness Part No. 101-574) is made of three sections, and when collapsed is just under 55" and weighs less than 3lbs. When extended, the GR12 will reach to 12ft. The GR18 (Ness Part No. 101-575) has five sections and when collapsed is less than 58" and weighs less than 5lbs. When extended, the GR18 will reach to 18ft.
     
    Time is money - Using the right tools during any installation saves time and money.
    Add to Cart
    $202.39
    $291.04
  • TACWISE STAPLES 12mm - BOX/5000 (HAR150)

     

    TACWISE STAPLES 12mm
     
    Description 
    12mm staples to suit the HAR130 Staple Gun.
     
    Qty 5000 per box.
    Add to Cart
    $51.92
    $74.16
Per Page      1 - 20 of 32

Powered by Abantecart eCommerce Solution